Laboratory Analyzers
The HORIBA Medical analyzer portfolio across hematology, hemostasis and clinical chemistry, together with slide preparation, digital morphology and automation solutions.
When setting up or renewing a laboratory, instruments are assessed together rather than one by one. Hematology, hemostasis and clinical chemistry are separate departments, but sample flow, quality control management and LIS connectivity are shared. A line built from one manufacturer's portfolio gives a single management logic across all three.
This page is the entry point to the three areas. Selection criteria and comparison tables for each are covered in detail on the corresponding category page; the list here shows the portfolio as a whole.
Selection criteria
- Departmental scope
- Which of hematology, hemostasis and clinical chemistry are installed at once determines instrument layout and staffing. Lines built from a single manufacturer reduce training and service overhead.
- Total sample flow
- What matters is total daily sample flow rather than departmental capacity in isolation. Where the workload peaks, capacity should be planned against peak load, not the average.
- Peri-analytical steps
- Smear preparation and microscopy are the most labour-intensive part of hematology. Automated slide preparation and digital morphology standardise this step and shorten manual review time.
- Automation and middleware
- Conveyor automation connects 2–6 analyzers on one line. A validation station and middleware automate result approval through rule packages and provide real-time performance indicators.
- Shared quality control management
- Running quality control and calibration tracking on one logic reduces documentation workload in accreditation. Shared control materials also simplify stock management.
Products
Yumizen H550 / H500
Compact bench-top hematology analyzers delivering CBC and a 5-part differential. iDoubleDiff reports three immature leukocyte populations. The H500 runs open/closed tube, the H550 in rack mode.
Yumizen H550E / H500E
The ESR models of the Yumizen H series. Patented CoRA technology reports CBC, the 5-part differential and ESR from one sample on one instrument.
Yumizen H500 CRP
Compact analyzer running a simultaneous 5-part differential and CRP from whole blood. CBC and DIFF need 20 µL of sample; malaria and dengue screening flags included.
Yumizen H2500 / H1500
High-throughput automated hematology line. 120 samples per hour, up to 57 parameters including NRBC, automated 360° sample mixing and a validation station with ISLH rule packages.
ABX Micros ES 60
Compact analyzer with a 3-part differential. Works from a 10 µL whole blood micro-sample using electronic impedance for cell counting and photometry for hemoglobin. Built-in thermal printer.
ABX Micros 60
Entry model of the ABX Micros series; a compact bench-top analyzer with a 3-part differential. Uses the same reagent family as the ES 60.
ABX Pentra XL 80
Established hematology analyzer for medium and high-volume laboratories. Up to 80 samples per hour, 24 selectable QC files and a 10,000-result memory.
ABX Pentra 60 C+
Analyzer with a 5-part differential for medium-volume laboratories. 60 tests per hour, 12 selectable QC files and LIS connectivity.
Pentra XLR
Hematology analyzer designed for high-volume routine work. Up to 80 samples per hour, 36 selectable QC files and 10,000 stored results with graphs.
Microsemi CRP LC-667G
Analyzer combining CBC and CRP in a compact footprint. 55 tests per hour for CBC alone, 15 tests per hour when CRP runs alongside the CBC.
Microsemi CRP LC-767G
Delivers the same test capacity as the LC-667G in a narrower housing. Stores up to 500 patient results and 180 QC results per level.
Yumizen SPS
Slide preparation system performing automated smearing and staining in a closed system. Offers automatic and manual staining modes; compatible with Yumizen H1500 and H2500.
Yumizen D20
Digital cell morphology system that automates manual microscopy. It digitises blood and urine samples, produces an AI-supported pre-classified report and enables remote review.
Yumizen P8000
Hematology validation station and middleware. Automates result validation through predefined rule packages (comments, rerun, reflex, delta check) and provides real-time performance indicators.
Yumizen T6000
Conveyor line developed for the HELO laboratory automation solution. Supports linear, angled, workcell and island configurations; 2–6 analyzers and up to 6 Yumizen SPS units per line.
Yumizen G200
Two-channel semi-automatic hemostasis instrument for small laboratories. Runs screening assays and D-Dimer; the master calibration curve removes routine calibration.
Yumizen G405
Four-channel semi-automatic analyzer for routine and specialty hemostasis. Combines nephelometric, chromogenic and immuno-turbidimetric methods; integrated printer and 7-inch touchscreen.
Yumizen G800
Fully automated bench-top hemostasis analyzer for mid-size workloads. Four independent channels, 160 PT tests per hour, continuous loading of 60 samples and 600 cuvettes.
Yumizen G800h / G850h
Fully automated bench-top analyzers with Advanced Pre-analytical Sample Integrity (A-PSI). Flags potentially problematic samples to improve accuracy; 150 PT, 70 aPTT and 40 D-Dimer tests per hour.
Yumizen G1550 / G1500
High-capacity fully automated hemostasis analyzer. Combines routine and specialty assays on one system, with up to 225 PT tests per hour and a one-million-result database.
Yumizen G1500h / G1550h
High-capacity hemostasis analyzers with A-PSI for medium to high workloads. Up to 225 PT tests per hour with pre-analytical sample integrity checking.
Yumizen C560
Standalone floor-standing clinical chemistry analyzer for mid-size laboratories. Brings high-end features usually found only on large integrated systems into a compact layout.
Yumizen C240
Compact clinical chemistry analyzer for small and mid-size laboratories. Combines standalone capability and advanced features in a cost-effective footprint.
Yumizen C230
Compact clinical chemistry analyzer for small laboratories. Its user-friendly interface supports full routine chemistry in a limited footprint.
Yumizen CA60
Compact semi-automatic clinical chemistry analyzer with a Multiple Array Light System (MALS). Measures at eight wavelengths, works with an 18 µL cuvette volume and stores over 100,000 results.
Yumizen CA40
Semi-automatic analyzer running chemistry, immunoturbidimetry and coagulation (PT, aPTT) assays together. Accepts serum, plasma, urine, CSF, whole blood and body fluids.
Yumizen E60
Electrolyte analyzer measuring sodium, potassium, chloride and calcium. Runs three parameters simultaneously, delivering a result in 60 seconds from a 90 µL sample.
Pentra C400
Clinical chemistry analyzer combining routine and specialty assays on one system. 55 onboard assays, cassette-format reagents, an integrated validation station and 15 wavelength options.
Pentra C200
Compact bench-top clinical chemistry analyzer. Performs bichromatic absorbance measurement at eight wavelengths, with a 100,000-result database and automated maintenance functions.
Frequently asked questions
- What is the advantage of sourcing hematology, hemostasis and chemistry from one manufacturer?
- Operator training, quality control logic, the service process and reagent supply run through a single point. With different manufacturers, each instrument means separate training, a separate service contact and a separate consumable supply chain.
- Is a slide preparation system necessary?
- Abnormal blood count results require smear review. With manual smears, quality varies by operator; automated systems produce standard-quality smears and staining in a closed circuit and shorten microscopy time.
- What does digital cell morphology do?
- It digitises blood and urine samples and produces an AI-supported pre-classified report. Because the report can be accessed and approved remotely, expert review does not require being at the instrument.
- At what scale does laboratory automation make sense?
- Conveyor solutions connect 2 to 6 analyzers on one line and support several slide preparation systems per line. Once sample volume and peak-hour density pass a certain threshold, they replace manual transport.
Related categories
Request a quote for a product in this group
Tell us your test volume and current instrument park, and we will prepare a written quotation for a suitable configuration.
The information on this page is intended for healthcare professionals only. Products are for in vitro diagnostic (IVD) use; refer to the manufacturer's instructions for use (IFU) for intended use, limitations and performance data.